The RX3 Power Rack 4200 is designed for lifters who want the confidence of lifting inside a rack. Its deeper
footprint allows you to train between the uprights using pin pipe safeties, giving you reliable protection when
pushing heavy squats, bench presses, and overhead movements, especially when training alone.
Built from 75mm x 75mm (metric 3" x 3") 11-gauge steel, the rack delivers a solid, stable feel under load while
keeping a clean, compact layout for home gyms and private training spaces. This focus on material quality and surface consistency helps preserve smooth engagement and long-term durability in the areas that see the most wear. Offset 26mm (metric 1") holes at 50mm
(metric 2") spacing across uprights and crossmembers make setup fast and precise, whether you’re adjusting J-cups,
safeties, or accessories.
As part of the RX3 system, this power rack is fully modular start simple with a classic power rack setup,
then
expand over time with rack
attachments like dip horns, landmines, storage, smith
machine, or cable systems. It’s a
rack that grows with your training, whether you’re focused on pure strength, powerlifting, or building a long-term
home gym centerpiece.
Engineered Differently. Built to Last.
Not all power racks are built the same. The RX3 Power Rack is designed from the ground up using premium materials and refined manufacturing processes that prioritize durability, performance, and long-term appearance.
Chrome uprights - Engineered for contact
Our RX3 uprights are built from superior precision-formed steel and finished in chrome, not standard powder coat.
Why chrome?
- Smoother, more even surface from the start
- Higher resistance to scratches and wear
- Increased rust protection over time
- Protection both inside and outside the upright tube
The difference starts before the finish is applied.
We use higher-grade steel that requires additional preparation and processing to retain a smooth, even surface. Unlike powder-coated uprights, which are sandblasted and then sprayed (creating a slightly textured feel), our chrome uprights go through extra steps to preserve surface consistency before entering the chrome bath.
Why does that matter?
Because a smoother surface is naturally more resistant to scratching and wear. In real training, your barbell will touch the uprights. Your J-cups will make contact. Attachments slide in and out repeatedly. Chrome is harder and more wear-resistant than powder coat, and combined with a smoother base surface, it better withstands long-term impact.
The chrome bath also coats the entire upright, including the inside of the tube, adding another layer of corrosion resistance beyond exterior-only finishes.
This isn’t cosmetic. It’s a durability choice built for years of contact.
Rounded chrome attachment pins - Built for daily use
Every RX3 attachment features a rounded chrome pin for smooth, effortless insertion.
Compared to powder-coated pins that chip and scratch over time, chrome-on-chrome contact:
- Reduces friction during adjustments
- Minimizes scratching on both the pin and the upright
- Maintains a clean, premium look
- Improves long-term fit and feel
Additionally, RX3 attachments include protective internal padding to prevent metal-to-metal contact.
Small details. Major difference.
Black E-Coat hardware - Clean finish, added protection
We use black e-coat hardware for improved corrosion resistance and long-term durability.
E-coating provides stronger protection than standard zinc hardware and helps resist rust in garage or humid environments. It also delivers a clean, cohesive look that complements the chrome uprights.
Because premium isn’t just about performance, it’s about finish.
RX3 POWER RACK SERIES - DESIGN SERIES ETHOS
HEAVY DUTY STEEL WITH MODULAR DESIGN
Lift confidently and safely from heavy-duty 75mm x 75mm (metric 3" x 3") 11-gauge steel with a 1400+ LB
weight capacity. Our fully modular design features offset 26mm (metric 1") holes with 50mm (metric 2")
spacing on all four sides, ensuring precise setup and compatibility across the RX3 ecosystem.
DURABLE COATINGS AND HARDWARE
Our 26mm (metric 1") hardware is coated with black e-coat which is more resistant to corrosion, more
durable, and looks very sleek because who doesn't love black hardware?
All attachments and hardware utilize 26mm (metric 1") pins with 50mm (metric 2") spacing to create a
fully modular and extremely versatile rack.
EFFICIENT ACCESSORY MOUNTING
Laser-cut numbering is added to each offset 26mm (metric 1") hole with 50mm (metric 2") spacing across
the uprights, cross bars, and accessories such as spotter arms, provides convenience.
ATTACHMENT DESIGN
All RX3 attachments are made with a rounded chrome pin making insertion into the uprights easy and
frictionless. The rounded chrome pin as well as the uprights will maintain their new appearance, even
after years of repeatedly inserting and removing attachments. Other companies use a powder-coated pin
that scratches and chips away on both the pin itself as well as the coating on the upright. Further, the
inside of all RX3 attachments are lined with protective padding made from durable materials to prevent
metal-to-metal contact.
HIGH-QUALITY FINISHES & DETAILS
Every RX3 Power Rack is finished with the same attention to detail found across the RX3 Series. From
clean welds and precision laser-cut components to durable powder-coat finishes, each element is designed
to look sharp and hold up under heavy use. RX3 Sandwich J-Cups feature stainless steel logo plates and
an oversized racking surface, making re-racking safer and more forgiving under load. All RX3 components
and attachments are engineered with long-term durability and daily training in mind—because the small
details matter when you lift heavy.
EXCEPTIONAL CONSTRUCTION
Logos are bolted on with stainless steel nameplates on 95% of attachments, while a few are laser-cut. No
stickers are used in any of our RX3 designs. Take a look at our Stainless Steel Logo Plate — we've gone
the extra mile by laser-cutting triangular designs into the nameplate, further enhancing its standout
appearance that is representative of the pinnacle of quality seen on the RX3 series.
IN-HOUSE PRECISION MANUFACTURING
We've upgraded our manufacturing and the first thing we wanted to offer is the RX3 line. 6-Axis Laser
cutting, CNC Lathe, robotic welding, friction welding, hydraulic servo bending, shot blasting, and
powder coating all in the same facility for a consistent and high-quality product. We've even brought in
a hardware packing machine to blister pack all hardware in-house.
CONTINUING INNOVATION
We didn’t stop at designing high-quality essentials like J-cups and spotter arms. The RX3 Power Rack is
built as part of a continuously evolving ecosystem, giving lifters the freedom to expand their setup
over time as their training needs grow. From cable systems and Smith machine attachments to our RX3 3000
Cable Tower components and patent-pending Tornado Pivot Arms, the RX3 platform makes it easy to upgrade
from a pure power rack into a more advanced training system, without replacing your foundation.
Our product development team meets biweekly to design new attachments and modular solutions for the RX3
series, ensuring long-term compatibility, innovation, and versatility. Start with the essentials today,
then unlock even more functionality tomorrow with future RX3 upgrades designed to integrate seamlessly
into your rack.
FAQs
Can I upgrade this rack later?
Yes. It’s fully compatible with RX3 attachments, including storage, dip stations, landmine, smith machine, and
cable systems.
Can I lift inside this rack using safeties?
Yes. Pin pipe safeties provide extra security while lifting and can also be used to perform barbell exercises
like rack pulls and pin squats
Do I need to bolt this into the ground?
RX3 Tornado Compact Smith Machine does not need to be bolted into the ground, but we always recommend doing so
for additional safety and liability.
| RX3 Series Power Racks Specs |
| BENEFITS OF RX3 SERIES POWER RACKS |
75x75mm / Metric 3" x 3" tubing with 26mm / Metric 1" pin holes and 50mm / Metric 2" offset
spacing
Less wear: all attachments feature rounded chrome pins and have padding inside
the clasp that wraps around the upright
More resistant: all components use black e-coat
hardware
Convenience: laser-cut height markings on all components (uprights, crossbars,
even attachments)
Quality: Stainless Steel logos used on 95% of attachments, while some are laser-cut. No stickers anywhere. |
| TUBING |
Metric 3x3 / 75 x 75mm tubing |
| HOLE SPACING |
Metric 2 inches / 50mm |
| HOLE SIZE |
Metric 1 inch / 26mm |
| STEEL GAUGE |
11 Gauge Steel |
| LASER-MARKED NUMBERING |
Yes on every hole |
| COATING |
Chrome and Black Powder Coat |
| HARDWARE |
Black E-Coat 1" hardware |
What's Included
