RX3 3000 Jumbo Rack

The RX3 Jumbo Rack 2' Depth 8' Width provides you with a full gym setup with a half rack, 2x cable tower 3000s with ability to do both 1:1 and 2:1 weight ratios, and options for built-in storage. This Jumbo Rack setup offers a great chest stretch by utilizing 1 handle from each cable tower when doing cable crossover movements.

RX3 SERIES DESIGN ETHOS

HEAVY DUTY STEEL WITH MODULAR DESIGN

Lift confidently and safely from 3" x 3" 11-gauge steel with 1400+ LB weight capacity. Our fully modular design features offset, 1" holes with 2" spacing on all 4 sides

DURABLE COATINGS AND HARDWARE

Our 1" hardware is coated with black e-coat which is more resistant to corrosion, more durable, and looks very sleek because who doesn't love black hardware? All attachments and hardware utilize 1" pins at 2" spacing to create a fully modular and extremely versatile rack.

EFFICIENT ACCESSORY MOUNTING

Laser-cut numbering for each of our offset 1" holes with 2" spacing on uprights, cross bars, and accessories such as spotter arms, provides convenience.

Attachment Design

All RX3 attachments are made with a rounded chrome pin making insertion into the uprights easy and frictionless. The rounded chrome pin as well as the uprights will maintain their new appearance, even after years of repeatedly inserting and removing attachments. Other companies use a powder-coated pin that scratches and chips away on both the pin itself as well as the coating on the upright. Further, the inside of all RX3 attachments are lined with protective padding made from durable materials to prevent metal-to-metal contact.

HIGH-QUALITY FINISHES & DETAILS

Chrome uprights where trolleys are used means less wear and scratches to your upright as you adjust the position of the trolley up and down. Our plate sleeves are also chrome with a rubber stopper which eliminates the potential of scratches and chips seen on cheaper, powder-coated plate sleeves. RX3 Sandwich J-Cups feature stainless steel logo plates with an oversized racking area, making it easier for lifters to re-rack their barbell into the intended racking area. All components and attachments were designed in more detail.

Exceptional Construction

Logos are bolted on with stainless steel nameplates on 95% of attachments, while a few are laser-cut. No stickers are used in any of our RX3 designs. Take a look at our Stainless Steel Logo Plate — we've gone the extra mile by laser-cutting triangular designs into the nameplate, further enhancing its standout appearance that is representative of the pinnacle of quality seen on the RX3 series.

In-House Precision Manufacturing

We've upgraded our manufacturing and the first thing we wanted to offer is the RX3 line. 6-Axis Laser cutting, CNC Lathe, robotic welding, friction welding, hydraulic servo bending, shot blasting, and powder coating all in the same facility for a consistent and high-quality product. We've even brought in a hardware packing machine to blister pack all hardware in-house.

Continuing Innovation

We didn't stop at designing just high quality standard attachments like j-cups and spotter arms; our cable trolley systems are the best in the market. Starting with our RX3 3000 Single Column Functional Trainer series which features dual trolleys on a single column to allow 2:1 or 1:1 weight ratios as well as our upcoming patent-pending Tornado Pivot Arm which will allow even more functional training capabilities in one unit. Both cable machines also include 2x black, aluminum anodized, knurled handles that are the best standard handles we've seen in the industry.

FAQs

Who is this unit for?
The RX3 Jumbo Rack 2' Depth 8' Width offers a complete gym setup with a half rack, 2x cable towers spaced enough apart for cable crossovers, and built-in storage options all in one space-saving unit. If you looked at our RX3 freestanding rack 3000 option and wanted something with a bit more stretch for cable crossovers, the ability to have more than 1 person using the half rack and cable towers at the same time, or you wanted to be able to use the squat rack without needing to adjust various attachments you might have placed on the cable towers, then this is for you.

What's the benefit of this RX3 Jumbo Rack 2' Depth 8' Width over others?
There's a lot of reasons why our RX3 series should be your top choice:

1. The 3000 series cable towers on the left and right sides offer the ability to do both 2:1 and 1:1 weight ratios. The 2:1 weight ratios are the most commonly used, suitable for dynamic and more functional movements where you want a lower starting weight of 10LBs and the ability to increase weight in 5LB increments. You generally want to work your way up to heavier weights by increasing in 5LB increments for exercises such as chest fly, face pulls, and basically anything else where you use 1 hand or 1 leg. Jumping in 10LB increments might be too heavy for most movements and cause you to break proper form. On the other hand, the dual 200LB weight stacks can be utilized to their full 200LBs by changing to 1:1 weight ratio. Exercises such as lat pulldowns and low rows may need weight in excess of 100LBs and the ability to utilize the 200LB weight stacks to actually feel like 200LBs comes in handy by the 3000 cable towers ability to change to 1:1 weight ratio.
2. The configuration of our jumbo rack allows you to use a flat bench, incline bench, or decline bench off of the front uprights of the half rack. You will have ample space to put your bench into the rack area, regardless if you have storage shelves installed in the center or not.
3. The distance from back uprights to front uprights for the 2x 3000 cable towers and the half rack are exactly the same. This is the most optimal design for space efficiency and allows cable crossover movements without the need to fold your half rack. Simply stand in front of the half rack and be in perfect position to utilize both cable towers for any cable crossover movement. This would also allow greater attachment options in the future as you'd be able to utilize attachments that span in between 2 uprights by using the half rack upright and the 3000 cable tower 3000 upright.
4. The footprint of this jumbo rack is one of the smallest, while still delivering all the functionality of others. At only 105 inches (8'9") long x 31 inches (2'7") deep, you get everything you need in a more space-efficient footprint.
5. We also offer unparalled quality and attention to detail throughout the RX3 series. The uprights where the trolley slides are done in chrome to reduce friction, reduce wear and tear from the trolley and aluminum pop pin, and more rust resistant. Our attachment pins such as j-cups and spotter arms also feature a rounded chrome pin that eliminates powder coat chipping from the pin and the upright. We're only using high-quality aluminum pulleys throughout, and include black anodized aluminum handles with the 3000 cable towers. All hardware is black e-coat which looks super sleek and is more scratch and corrosion resistant.

Do I need to bolt this into the ground?
The jumbo rack does not need to be bolted into the ground, but we always recommend doing so for additional safety and liability

What other attachments are available?
This unit is 3"x3" with 1" holes and 2" spacing, so there's are a wide variety of attachments from us and others available for this specification. We recommend using the following attachments: spotter arms, lat pull down seat, adjustable foot plate, FT Cable Output Adapter.

For storage options built into the rack, we recommend:
- up to 8x plate sleeves
- up to 4 total shelves consisting of either RX3 43" Plate and Ball Shelf or RX3 43" Kettlebell and Dumbell Shelf.

How do I add 2.5LB increments or add more weight to the 200LB stack?
You can utilize our Weight Stack Plate Load Pin, a 2.5LB attachment that inserts into the weight stack and allows you to increase weight by 2.5LBs (with 1:1 weight ratio) or 1.25LBs (with 2:1 weight ratio) as well as add more weight to the 200LB stack.

I'm worried about my ceiling height to fit this rack, can you help?
There's an option to adjust to our shorter, 86" Rack model by checking the box above the Add To Cart button if your ceiling is lower than 94". If your ceiling is greater than 94", we always recommend fitting the tallest rack available that your ceiling can allow. The pull-up bar can be adjusted downwards anywhere along the upright if you want to have more clearance for your head when doing pullups.

RX3 3000 SPECS
BENEFITS OF THE RX3 3000 SERIES	3" x 3" tubing with 1" pin holes for a wide variety of attachment options Weight Range: Start at 10 LBS with 5 LB increments (single handle) all the way up to 200 LBS (dual handle) Less Wear: Chrome uprights and aluminum pulleys Convenience: Aluminum Anodized pop pin with a stainless Steel knurled handle on trolley makes adjustments easy
WEIGHT RATIO	1:1 with dual handle, 2:1 with single handle
STARTING WEIGHT PER SINGLE HANDLE	10 LBS with 5 LB increments
STARTING WEIGHT PER DUAL HANDLE	20 LBS with 10 LB increments
WEIGHT STACK	200 LBS
CABLE TRAVEL (SINGLE HANDLE FROM 1 COLUMN)	94" rack = 97" (2460mm) | 86" rack = 81" (2060mm)
CABLE TRAVEL (DOUBLE HANDLE FROM 1 COLUMN)	94" rack = 48" (1230mm) | 86" rack = 41" (1030mm)
TOTAL TROLLEY POSITIONS	94" Rack = 33 positions | 86" Rack = 29 positions. Both spaced 2" apart.
TROLLEY LOWEST ADJUSTMENT POINT	13"
TROLLEY HIGHEST ADJUSTMENT POINT	94" rack = 80" (2040mm) | 86" rack = 72" (1840mm)
TROLLEY SPACING	2"
CABLE MATERIAL	Aircraft grade nylon cables
Trainer Handles	Black, aluminum anodized handles with knurling
PULLEYS	Aluminum
HARDWARE	Black, e-coat 1" hardware

What's Included

• 6x RX3 Black 92" Upright
• 2x RX3 Chrome 92" Upright
• 12x RX3 26" Black Crossbar
• 2x RX3 Cable Tower 3000 Attachment (without cable)
• 2x 26" Crossbar Cables for RX3 Cable Tower 3000
• 1x RX3 42" Black Crossbar
• 1x RX3 Logo Plate for Cross Bar
• 1x RX3 42" Pull Up Bar
• 2x RX3 J-Cups