The RX3 3000 Plate Loaded Cable Tower is the a Single Column Cable Tower made with 3"x3" uprights, 11-gauge steel, and 1" holes to allow the greatest number of attachment options and offer a fully modular setup. The dual handle design on a single column provides the ability to change from 2:1 or 1:1 ratio by using 1 or both handles. The 93" tall unit has plenty of height for seated lat pulldowns with full range of motion.
RX3 SERIES DESIGN ETHOS
HEAVY DUTY STEEL WITH MODULAR DESIGN
Lift confidently and safely from 3" x 3" 11-gauge steel with 1400+ LB weight capacity. Our fully modular
design features offset, 1" holes with 2" spacing on all 4 sides
DURABLE COATINGS AND HARDWARE
Our 1" hardware is coated with black e-coat which is more resistant to corrosion, more durable, and looks
very sleek because who doesn't love black hardware?
All attachments and hardware utilize 1" pins at 2" spacing to create a fully modular and extremely
versatile rack.
EFFICIENT ACCESSORY MOUNTING
Laser-cut numbering for each of our offset 1" holes with 2" spacing on uprights, cross bars, and
accessories such as spotter arms, provides convenience.
Attachment Design
All RX3 attachments are made with a beveled chrome pin making insertion into the uprights easy and
frictionless. The beveled chrome pin as well as the uprights will maintain their new appearance, even
after years of repeatedly inserting and removing attachments. Other companies use a powder-coated pin
that scratches and chips away on both the pin itself as well as the coating on the upright. Further, the
inside of all RX3 attachments are lined with protective padding made from durable materials to prevent
metal-to-metal contact.
HIGH-QUALITY FINISHES & DETAILS
Chrome uprights where trolleys are used means less wear and scratches to your upright as you adjust the
position of the trolley up and down. Our plate sleeves are also chrome with a rubber stopper which
eliminates the potential of scratches and chips seen on cheaper, powder-coated plate sleeves. RX3
Sandwich J-Cups feature stainless steel logo plates with an oversized racking area, making it easier for
lifters to re-rack their barbell into the intended racking area. All components and attachments were
designed in more detail.
Exceptional Construction
Logos are bolted on with stainless steel nameplates on 95% of attachments, while a few are laser-cut. No
stickers are used in any of our RX3 designs. Take a look at our Stainless Steel Logo Plate — we've gone
the extra mile by laser-cutting triangular designs into the nameplate, further enhancing its standout
appearance that is representative of the pinnacle of quality seen on the RX3 series.
In-House Precision Manufacturing
We've upgraded our manufacturing and the first thing we wanted to offer is the RX3 line. 6-Axis Laser
cutting, CNC Lathe, robotic welding, friction welding, hydraulic servo bending, shot blasting, and
powder coating all in the same facility for a consistent and high-quality product. We've even brought in
a hardware packing machine to blister pack all hardware in-house.
Continuing Innovation
We didn't stop at designing just high quality standard attachments like j-cups and spotter arms; our
cable trolley systems are the best in the market. Starting with our RX3 3000 Single Column Functional
Trainer series which features dual trolleys on a single column to allow 2:1 or 1:1 weight ratios as well
as our upcoming patent-pending Tornado Pivot Arm which will allow even more functional training
capabilities in one unit. Both cable machines also include 2x black, aluminum anodized, knurled handles
that are the best standard handles we've seen in the industry.
FAQs
Who is this unit for?
This unit is for those who want the ability to do 1:1 ratio as well as 2:1 ratio for longer cable travel, plus
want the modularity and attachment options of something that is 3"x3" with 1" pin holes at 2" spacing. The RX3
3000 Plate Loaded Cable Tower also saves you money compared to our weight stack model. Because of our 93"
height, this unit is tall enough to accommodate a seated lat pulldown with full range of motion. The 2 handle
design makes this unit extermely versatile as you can perform 1-handed exercises as well as 2-handed exercises
in one, space-saving unit.
Do I need to bolt this into the ground?
If you do not wish to bolt into the ground, please add the RX3 stabilizers will add
further stability. If
you do not add the RX3 stabilizers, we recommend bolting into the ground for safety and liability.
What other attachments are available?
This unit is 3"x3" with 1" holes and 2" spacing, so there's are a wide variety of attachments from us and others
available for this specification. We're currently offering free shipping on this unit plus any added accessories
you order with it by selecting the $0 cost fedex shipping option. We recommend using the following attachments:
spotter arms, lat pull down seat, adjustable foot plate, FT Cable Output Adapter.
You can also add the RX3
stabilizers if you don't wish to bolt into the ground.
Our design team meets biweekly and are currently working on a broad range of attachments which will be added here as we
develop more and more.
What is the benefit of a Cable Tower functional trainer?
Cable Tower functional trainers take up less space and offer more bang for your buck. Because of our dual handle
design, you can still do many 2-handed exercises as well as 1-handed exercises, in nearly half the space and
less cost!
Click
here for more information on pulley ratios
| RX3 3000
SPECS |
| BENEFITS OF THE RX3 3000 PLATE LOAD SERIES |
3" x 3" tubing with 1" pin holes for a wide variety of attachment options
Dual Pulley Design: Allows for both 2:1 and 1:1 weight ratios. The ability to rotate your hand
for pronated and supinated grips during any movement
Less Wear: Chrome Uprights and Aluminum Pulleys
Convenience: Aluminum Anodized pop pin with a stainless Steel knurled handle on trolley makes
adjustments easy |
| WEIGHT RATIO |
1:1 with dual handle, 2:1 with single handle |
| LOADABLE PLATE SLEEVE |
8 inches / 205mm per sleeve per trolley |
| PLATE SLEEVE MATERIAL |
Chrome |
| WEIGHT CAPACITY PER TROLLEY |
450 LBs |
| PLATE SLEEVE DIAMETER |
Removable 50mm / 2" chrome sleeve with 1" sleeve underneath |
| CABLE TRAVEL (SINGLE HANDLE FROM 1 COLUMN) |
100" |
| CABLE TRAVEL (DOUBLE HANDLE FROM 1 COLUMN) |
50" |
| TOTAL TROLLEY POSITIONS |
33 positions spaced 2" apart |
| TROLLEY LOWEST ADJUSTMENT POINT |
13" |
| TROLLEY HIGHEST ADJUSTMENT POINT |
78" |
| TROLLEY SPACING |
2" |
| CABLE MATERIAL |
Aircraft grade nylon cables |
| TRAINER HANDLES |
Black, aluminum anodized handles with knurling |
| PULLEYS |
Aluminum |
| HARDWARE |
Black, e-coat 1" hardware |
What's Included
